Support for unattended production
The team at UPM Conveyors recently worked on updating the production system for Rutland Plastics, who approached UPM to achieve unattended production on a Krauss Maffei KM150.
UPM provided a turnkey solution requiring 8 belt conveyors to allow automatic product divert for QC inspection; ferrous/non-ferrous metal detection; product cooling; parts separation and box filling with a capacity of 8 full; 8 empty and 1 filling.
Product divert is achieved with a small reversing conveyor located onto a swan neck conveyor in the well of the machine and at any stage in production an operator can energise to reverse and transfer a shot to an integral sample drawer for QC inspection.
Metal detection is based on UPM inserting a search coil under the inclined section of the Swan Neck in the well of the machine. When a foreign body is detected it will energise an audio-visual alarm and stop the belt conveyor, allowing an operator to check and remove the contamination.
This process does not affect the moulding machine cycle as products continue to be produced and accumulated on the conveyor until the operator has reset to start again.
Further automated elements
Product cooling is necessary to avoid any deformation to the mouldings which are produced in PP on multi-cavity tools ranging from 8-16 impressions mould and 4 sprues with a section thickness of 5 to 15mm. UPM fitted a cooling tunnel with high flow air fans to reduce the temperature from 80oc to 20oc.
For parts separation, the system works via a roller drum with central adjustment for the gap to allow ease of changing so the sprues exit onto another swan neck for transfer to a granulator and mouldings discharge. This then goes to a third swan neck for conveying to the box filling station.
